Connection Details and LED Indicators
Last updated
Last updated
© 2023 MobiusFlow® - All Rights Reserved - MobiusFlow® is a registered trademark of Infrastructure Software Solutions Limited trading as MobiusFlow® - All other brand names, product names, or trademarks belong to their respective owners
You have three options to power the connector
| Power Option | Details |
|---|---|
PoE | Power over Ethernet (30 watts) |
DC Supply via screw terminals | 5 to 24Vdc 500mA |
USB | 5V 500mA via micro USB |
You can connect to your network via wired Ethernet or 2.4GHz WiFi
The image and table below describe the connections and LED indicators on the front panel of the connector.
| Item | Description | Comments |
|---|---|---|
1 | Ethernet port and PoE Supply |
|
2 | 5 to 24vdc screw terminals |
|
3 | USB power |
|
4 | Configuration button | Push and hold to enter config mode or factory reset |
5 | Power OK indicator | Connector is powered |
6 | 5 to 24vdc power OK |
|
7 | USB power OK |
|
8 | PoE power OK |
|
9 | MobiusFlow® connected | Connected to MobiusFlow® gateway |
10 | Network connected (upstream) | Network connection established |
11 | Module present in slot 1 |
|
12 | Module 1 activity | Flashes when module 1 sends or receives data |
13 | Module present in slot 2 |
|
14 | Module 2 activity | Flashes when module 2 sends or receives data |
The product label is on the bottom of the connector. It shows the part number, software version and serial number of the product.
The serial number is required when configuring both the connector and your MobiusFlow® instance. Make sure you take a note of the serial number before starting
