Connection Details and LED Indicators

Power Options

You have three options to power the connector

Power Option	Details
PoE	Power over Ethernet (30 watts)
DC Supply via screw terminals	5 to 24Vdc 500mA
USB	5V 500mA via micro USB

Network Options

You can connect to your network via wired Ethernet or 2.4GHz WiFi

Front Panel

The image and table below describe the connections and LED indicators on the front panel of the connector.

Item	Description	Comments
1	Ethernet port and PoE Supply
2	5 to 24vdc screw terminals
3	USB power
4	Configuration button	Push and hold to enter config mode or factory reset
5	Power OK indicator	Connector is powered
6	5 to 24vdc power OK
7	USB power OK
8	PoE power OK
9	MobiusFlow® connected	Connected to MobiusFlow® gateway
10	Network connected (upstream)	Network connection established
11	Module present in slot 1
12	Module 1 activity	Flashes when module 1 sends or receives data
13	Module present in slot 2
14	Module 2 activity	Flashes when module 2 sends or receives data

Product Label

The product label is on the bottom of the connector. It shows the part number, software version and serial number of the product.

The serial number is required when configuring both the connector and your MobiusFlow® instance. Make sure you take a note of the serial number before starting